Game Boy Advance SP Laminated Screen M2 - FunnyPlaying IPS LCD

*NEW* Laminated IPS screen for the Game Boy Advance SP (GBA SP) - 3.0 inch FunnyPlaying M2

No soldering is required! One wire can be soldered for access to the OSD menu and brightness control if desired.

This is the brand new 3-inch version just released in 2024. 

Install this backlit IPS screen with a pre-installed laminated glass lens. The laminated panel means no dust and a more realistic display effect.

The screen is plug-and-play with a no-solder option. (See notes below)

The screen can be installed in an original shell or an aftermarket shell. 

Features;

• OSD feature menu - If soldered (see video)
• No dust under the pre-laminated lens.
• At the lowest brightness, the kit power consumption is 0.14w
• Mixed frame switch
• Brightness adjustment (if soldered)

What is included;

• 3.0 Laminated IPS M2 LCD                     × 1

  Main ribbon                                           × 1

  Welding line                                           × 1

Whats not included;

• 1 x GBA SP shell

Install guide:

https://funnyplaying.com/blogs/gameboy-advance-news/tutorial-for-gbasp-laminate-m2-kit

Notes;

1. The logo is the full Game Boy. The image shows just the Game.

2. OSD menu is available with the soldering of 1 wire. It has 4 different functions - Brightness, Colour, Display and Frames. The IPS screen will still work without these functions if you choose not to solder the wires.

3. Shell modification is required if you do not use a FunnyPlaying pre moulded shell. 

4. A seperate glass lens is not required, as the screen comes with a glass lens laminated to it.

5. Please test your screen kit for faults before installation. A photo or video will be required for potential warranty claims. Any issues are to be reported before installing inside a shell or adhering to a gasket. Replacements will not be made for installed kits.

6. It is advisable to wear a static bracelet before installing the screen to avoid any potential shorts